XICOY V2s DOUBLE ACTION ELECTRONIC VALVE

The Xicoy V2s is a compact double-action electronic valve designed for the reliable control of pneumatic landing gear systems and gear doors. It connects directly to your receiver (RX) and provides precise control in a single, lightweight unit.

Features

• Controls retracts and gear doors from one compact device

• Three-position operation:

  • Open A

  • Closed

  • Open B

• Automatically depressurises the air system when closed, helping to minimise air leaks

• Can be configured as two independent valves when simultaneous operation is not required

• Simple endpoint programming via onboard push button

• Integrated status LED

• Manual override operation allows valve actuation without electrical power

• Suitable for landing gear systems operating below 7 bar (100 psi)

Specifications

Specification	Value
Dimensions	34 x 20 mm
Weight	32 g (1 oz)
Operating Voltage	4.0 – 8.4 V
Current Consumption	<6 mA (idle), 80 mA (active)
Maximum Air Pressure	7 bar (100 psi)

Programming Instructions

• Power on the valve while holding the programming button.

• Release the button. The LED will flash once per second.

• Set your transmitter to the Gear Up position.

• Press the button to store the current position as Gear Up.

• The LED will now flash twice per second.

• Set your transmitter to the Gear Down position.

• Press the button again to store the Gear Down position.

Power-Up State Programming

Valves manufactured from November 2014 onwards (identified by a green LED) allow the power-up state to be configured.

Default power-up state: Both valves closed (system not pressurised).

If you prefer the pneumatic system to pressurise automatically when powered on, simply press the button during normal operation to change the startup behaviour. The valve will then automatically pressurise the system immediately after power-up.